User's Manual

Connect with external audio source equipment

8. Reset setting　

Hold [TEMPO+] and [SET UP] button at the same time. It reset back to the factory setting:

All user drum kits: voice/volume/pan/tuning

Practical setting: sensitivity/crosstalk rejection/striking force curve

9. MIDI setting

This equipment is compatible with various MIDI devices and can be used as trigger device or

audio source. It is also compatible with part of GM standard, and can be used with many audio

sequencer softwares together.

MIDI IN: receives the external MIDI signal when connecting with external MIDI devices.

MIDI OUT: sends the external MIDI signal when connecting with external MIDI devices.

USB: the standard USB2.0 interface can be connected with standard USB MIDI device or PC.

The operation system has its driver without the need of repeated installation. It is compatible with

computer system, e.g. XP，Win7,Vista,Mac OSX . After connection, the system recognizes this equipment

as USB COMPOSITE DEVICE.

(USB is only used when connected with MIDI devices)

Note: when USB is connected with PC, all MIDI data can be sent or received via USB.

This equipment can send its various information via channel 10, including: trigger notes, force, hi-hat pedal

performance and status, etc.

(Note: the song replaying and metronome information can not be sent)

Use the external audio sequencer to record the performance

1). Connect external audio sequencer or PC via MIDI OUT or USB.

2). Set the equipment of channel 10 in the audio sequencer or in the sequence software, and then start

recording.

3). Play the pads.

4). Stop the performance and recording, and listen to the performance.

Used as audio source equipment

When connecting with external MIDI keyboard or audio sequencer via MIDI OUT or USB cable,it receives

its MIDI output signal. At this time this equipment can play the effective signals. The output voice changes

as the drum kit is switched. This equipment has most of the GM voices. User can establish user drum kits.

Refer to MIDI List for MIDI information.

MIDI connection