User's Manual

7). Loosen the square screw of the hammer
8). tighter the square screw to fix the hammer
Assemble the pedal and the bass drum
1)．Put the pedal to the left floor.
2)．Put the bass drum（with hammer）to the right floor.
Note：CSD120 pedal is used as bass drum. Each of the pedal can be used as bass drum.
Connect the pads
1). Use the cable to connect the D-SUB connector of the module and the pad.
2). Use the cable tie to tie the cable（12 ties）
Fix the hammer bar
the hammer pointing
to the pad center
tighten the square screw
loosen square screw
CSD120 CSD130
tighten the screw