Operator's Manual

PRELIMINARY RELEASE
*** This is a confidential document. Do not distribute. ***
itude information, contact Carlson Support or your
l Control” tab.
or
your Basestation. Both the Basestation and its active CPEs will appear.
I bleshoot the Internet connection and/or wait
ctor
vigate to a webpage of your choice. A successful connection
roubleshoot your Internet connection and/or wait
it, congratulations! You have
log periodic antenna
verti
cally, using the included pole mounting kit.
If your find incorrect latitude and long
spectrum database manager for corr
ection.
Close the “Basestation Details” window.
2.9.5. Verifying Cell Control
At the top of the page, click the “Cel
Figure 13: Cell Control Tab
Sel
ect the tab shown f
Figure 14: Cell Control - Basestation & CPEs
f the Basest
ation and CPEs do not appear, trou
another 3-5 minutes. If they fail to appear, contact Carlson Support for technical assistance.
Using a standard Ethernet cable (not supplied), connect a PC to the “IN” port of the POE inje
connected to the first CPE.
Open a web browser and na
verifies the operational status of the link.
If you are unable to browse to a website, t
another 3-5 minutes. If you need assistance, contact Carlson Support.
Repeat link verification steps for remaining CPE unit(s).
Once you have verified the operational status of every un
completed the first step in testing your new RuralConnect system.
Turn to Page 21 for more information about the Installers mount the
Page | 14