Operator's Manual

PRELIMINARY RELEASE
*** This is a confidential document. Do not distribute. ***
5. Appendices
5.1. Specifications
SYSTEM SPECIFICATIONS
Frequency Bands UHF 470-786 MHz (US and ETSI)
Channel Spacing 6 MHz (US), 8 MHz (ETSI)
Bandwidth 100 kHz (M2M) to 4.5 MHz (Rural BB)
Modulation QPSK, 16QAM
Data Rates 4, 6, 8, 12, and 16 Mb/s
Data Rate Control Dynamic or fixed
Receive Interface Proprietary technology is used to reduce
co-channel interference
RX Sensitivity -89 dBm for 10-6 BER using QPSK 1/2
-86 dBm for 10-6 BER using 16QAM 1/2
RX Blocking Resistance -50dBm TV transmission on chan N+2
-20 dBm cellular station transmissions
RX Max Signal -16dBm with full linearity
Operating Mode TDD (Time Division Duplexing)
User Ports 10/100 baseT Ethernet
Warranty Limited Warranty, USA
NETWORK SPECIFICATIONS
Multipoint Client Capacity 4096 (M2M)
Typical Client Loading 20 clients with 3Mb/1Mb residential SLA
Management Web-based browser using https interface
End-to-End Latency 30-100 ms typ.
REGULATORY SPECIFICATIONS
ACP and Spectrum Mask Meets FCC and Ofcom specifications
-55 dBr +/- 3 MHz relative to 12.2 dBm
(measured at 100 KHz increments)
ENVIRONMENTAL SPECIFICATIONS Operating Temperature -30° to 55° C
Operating Humidity Up to 95%, non-condensing
Shock and Vibration MIL-STD-810
SECURITY
Security Mechanism WPA2/AES-128 bit shared secret key
BASESTATION ANTENNA
Model Number 053-470-786-6-2B-V
Antenna Type Omnidirectional
Beamwidth 360 degrees
Polarity Vertical
Antenna Connector “F” type female 75 Ohms
Frequency Range 470-786 MHz
Gain 5 dBi
Page | 30