User's Manual

Trailblazer Installation and User Manual version 1.02 18
The new CPE and Base unit
software will take about a minute to
download. The firmware takes
about 3 or 4 minutes to download.
To the right you will see a sample
view of what you should see during
the download.
Do not interrupt the download!
When the download is complete,
the unit will automatically reboot
and update the version numbers.
Once the “Program Download”
button reappears, you can
select another file to
download.
Select the Status tab to view the
current status of RF link, signal
strength, line “hook” state, SFD
loss count and an on-board
temperature reading. Select
DISCONNECT in the COM Port
selection box before moving the
serial cable to another radio card.
Resume connection and status
readings by selecting the active
COM port. The battery voltage
status only applies to CPEs
equipped with solar power.
Loading Software with the GUI
GUI Showing Status of a CPE