User's Manual

Trailblazer Installation and User Manual version 1.02 23
To allocate total data Bandwidth of the base unit:
To allocate data channels in 64kbps increments, EEprom register “F” is the total
number of data channels allocated to the Base unit.
To allocate total data Bandwidth of the CPE terminal:
To allocate channels to the CPE stations, the EEprom registers 10,11,12,13 are
used. This will handle up to (4) CPEs in a star configuration.
In the CPE, EEprom registers 10,11,12,13 the MSB is used to state the amount
of 64kb channels bonded for data. The LSB is used to state the number of 64kb
channels available for voice services. See the following table for some example
scripts.
Point to Point Point to Point Star
256kb bandwidth, 2 data channels
and 2 voice channels:
256kb bandwidth, 3 data channels
and 1 voice channel:
512kb bandwidth, 2 voice
channels for each CPE:
wee e 84
000E: 84
wee e 84
000E: 84
wee e 08
000E: 08
wee f 02
000F: 02
wee f 03
000F: 03
wee f 00
000F: 00
wee 10 22
0010: 22
wee 10 31
0010: 31
wee 10 02
0010: 02
wee 11 00
0011: 00
wee 11 00
0011: 00
wee 11 02
0011: 02
wee 12 00
0012: 00
wee 12 00
0012: 00
wee 12 02
0012: 02
wee 13 00
0013: 00
wee 13 00
0013: 00
wee 13 02
0013: 02
reset reset reset
Table 11: Example configuration scripts
Additional Configuration Notes:
• Total transmit channel count may only be 1, 2, 3, 4, 5, 6, 7, or 8
• Total CPE channels may not exceed 8
• The sum of CPE voice and data channels may not exceed 8 either
individually or collectively
• Currently, all timeslots must be the same return bandwidth
• There are distance issues regarding use timeslot zero (TS0)