Operator`s manual

9” CHIPPER SERVICE
BELTS
88
• Insert old or new bushing, lining up
keyway with the keyway on the shaft.
Make sure the key is in position.
• Replace bolts in the sheave and tighten
until bushing is at the location marked
on the shaft earlier.
• Go to Replacing Belts section to replace
belts and adjust tension. Make sure
sheaves are aligned when retightening
belts to the proper tension.
• ALWAYS REMEMBER TO REPLACE
BELT GUARDS BEFORE STARTING
MACHINE. ROTATING BELTS AND
SHEAVES ARE DANGEROUS AND
COULD SEVERELY INJURE
SOMEONE.