Operator`s manual

9” CHIPPER MACHINE OPERATION
32
LOWER THE INFEED TRAY
• During transportation the infeed tray will
be closed and locked using the spring
lock pins attached. At the job site,
release the lock pins and lower the tray.
• There are two removable lock pins
located at the back of the infeed frame,
there is a pin on each side of the frame.
Once the tray is fully lowered, remove
the pins and lock the tray into position as
shown in these pictures. Make sure
there is no brush or other obstruction
between the tray and the hopper so that
the tray will lower fully.
SPRING LOCK PIN