Operator`s manual

9” CHIPPER MACHINE OPERATION
34
• Carlton Chippers are equipped with a
height adjustable discharge chute. This
allows the discharge chute to be adjusted
for different truck heights and discharge
angles.
• To adjust discharge chute height:
− Flip retainer up out of the way of the
crank handle
− Crank height adjuster to adjust chute
to desired height
− Return retainer to original position
securing crank handle
NEVER ADJUST THE DISCHARGE CHUTE
WHILE CHIPPER IS IN OPERATION OR
WHILE THE CUTTER DISK IS SPINNING
START ENGINE
• Key Switch and Gauges are located in
clear view on the engine housing
• Key switch has 3 positions
- Off, Run and Start
• There is an emergency shutdown bypass
switch, which must be held down during
starting. (If the engine experiences low
oil pressure or high temperatures when
running, this switch will shut down the
engine.)
DO NOT OPERATE THE ENGINE
AT AN ANGLE GREATER THAN
25° OR SEVERE ENGINE DAMAGE
WILL OCCUR. PROPER ENGINE
OIL LEVEL MUST BE MAINTAINED
TO ACHIEVE MAXIMUM ANGLE
OF OPERATION OF 25°. (See Engine
Owner’s Manual for proper oil level.)
CONTROLS MAY VARY DEPENDING ON
ENGINE OPTION