Specifications

3500D PIVOT ASSEMBLY
82
ITEM NO PART NO DESCRIPTION QTY
1 3500120 Pivot 1
2 3500159 Hardened Swing Pivot Shaft 1
3 0500202 Bearing Cup 2
4 0500122 Bearing Cone 2
5 0500403 Seal, Bottom 1
6 0500404 Seal, Top 1
7 3500121 Top Pivot Inner Bushing 1
8 3500122 Bottom Pivot Bushing 1
9 3500123 Top Pivot Bushing 1
10 0150214 1 1/4-12 Jam Nut 2
11
0150215 1 1/4-12 Hex Castle Nut 3
12 0150501 Cotter Pin - .188 x 2 19
13
0150802 Hardened Bushing - 1 1/4” 6
14 0300140 Cylinder Clevis 3
15
3500189 Lift Pivot Shaft 1
16
0150310 1 1/4” Flat Washer 4
17 0300138 Cylinder Pin - 1” 8
18 0150123 5/16-18 x 3/4 SHCP 6
19 0150124 5/16-18 x 3/4 FHSCP 6
20 0150308 1” Flat Washer 4
21 0150801 Hardened Bushing - 1” 6
22 A160T07 Key - 3/4 x 3/4 x 3 2
23
3500162 Side Pivot Tube 2
24
3500280 Side Pivot Gusset 2
25
3500125 Middle Pivot Tube 1
26
3500107 Pivot Tube 1
27 0150600 Grease Fitting – 1/4” NPT 4
28 Pop-Out Valve 1
29 H752012 Grease Hose Assembly – 44” 1
30 H752013 Grease Hose Assembly – 43.5” 1
31 H752014 Grease Hose Assembly – 45” 1
32 0300528 1/8 MP–1/4 JIC 45 – 2503-4-2 3
33 7200330 Grease Hose Coupling Weldment 1
PARTS # 23 & 24 ARE WELDED ON THE PIVOT ASSEMBLY AFTER THE BOOM IS LEVEL
#25 IS WELDED IN THE FRAME ASSEMBLY.
PART #26 IS WELDED IN THE PIVOT ASSEMBLY
CONSULT THE FACTORY BEFORE ORDERING THESE PARTS
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦