Specifications

7500 PIVOT ASSEMBLY
82
ITEM NO PART NO DESCRIPTION QTY
1 7200120 7200 Pivot Weldment 1
2 6500159 Swing Pivot Shaft – 1 1/2" 1
3 0500203 Race – 65/75 #3820 2
4 0500123 Bearing – 1 1/2" 65/75 3876 2
5 0500402 Seal – 65/75 Bottom 1
6 0500401 Seal – 65/75 Top 1
7 6500121 Top Pivot Inner Bushing – 65/75 1
8 6500122 Bottom Pivot Bushing – 65/75 1
9 6500123(6500121A) Top Pivot Bushing – 65/75 1
10 0150219 1 1/2-12 Hex Jam Nut 2
11
0150220 1 1/2-12 Hex Castle Nut – GR 5 3
12 0150501 Cotter Pin – 3/16” x 2” 19
13
0150803 Hardened Spring Bushing – 1.5” 6
14 0300105R Prince Cylinder Clevis 1” Rod 3
15
6500189 Lift Pivot Shaft 1 1/2" 1
16
0150310 1 1/4” Flat Washer 4
17 0300105Q Captured Pin – Prince Cylinder 8
18 0150123 5/16-18 x 3/4 SHCP 6
19 0150124 5/16-18 x 3/4 FHSCP 6
20 0150308 1” SAE Flat Washer 4
21 0150801 Hardened Spring Bushing - 1” 6
22 A160T07 Key 3/4x3/4x3 2
23
7200162 Pivot Leveler – 65/75 2
24
7200280 Pivot Gusset 2
25
6500125 Middle Pivot Tube 1
26
7200105 Pivot Tube 1
27 0150600 Grease Fitting – 1/4” NPT 4
28 Pop-Out Valve 1
29 H752012 Grease Hose Assembly – 44” 1
30 H752013 Grease Hose Assembly – 43.5” 1
31 H752014 Grease Hose Assembly – 45” 1
32 0300528 1/8 MP–1/4 JIC 45 – 2503-4-2 3
33 7200330 Grease Hose Coupling Weldment 1
PARTS # 23 & 24 ARE WELDED ON THE PIVOT ASSEMBLY AFTER THE BOOM IS LEVEL
#25 IS WELDED IN THE FRAME ASSEMBLY.
PART #26 IS WELDED IN THE PIVOT ASSEMBLY
CONSULT THE FACTORY BEFORE ORDERING THESE PARTS
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦