Specifications

7500 MACHINE CONTROLS
11
SWING SPEED ADJUSTMENT
• Adjust swing speed for smooth
operation. Turn valve counter-clockwise
to slow cutter head swing as engine
speed increases. Close valve by turning
clockwise to allow head to move side to
side at low engine RPM.
CUTTER WHEEL ENGAGEMENT
• With the engine RPM at idle, engage the
cutter wheel by lifting the engine slide
lock and slowly pulling the engagement
lever toward the front of the machine. It
may be easier to lift the engine slide lock
if you first press down on the
engagement lever.
• To disengage the cutter wheel, reduce
the engine RPM to idle and slowly push
the engagement lever back toward the
cutter wheel. The engine slide lock
should automatically go into place, make
sure it is locked in place.
OPTIONAL HYDRAULIC CONTROLS
THROTTLE
• If equipped, the throttle switch increases
or decreases engine RPM.
ENGAGER
• If equipped, the engager switch engages
or disengages the cutter wheel.
THROTTLE & ENGAGER SWITCHES
CUTTER WHEEL ENGAGED
CUTTER WHEEL DISENGAGED ENGINE SLIDE LOCKED