Specifications

7500 MACHINE OPERATION
18
STARTING - READ ENGINE MANUFACTURERS OWNERS’ MANUAL BEFORE
STARTING.
• Check all fluids before starting.
• Drive belts must be disengaged before starting.
• Inspect all connections, teeth, tires, etc. (See Daily Checklist).
• Start engine at half speed and allow sufficient time for oil to circulate before proceeding.
• Test controls for proper operation.
• Avoid transversing slopes.
• DO NOT OPERATE THE ENGINE AT AN ANGLE GREATER THAN 25° OR
SEVERE ENGINE DAMAGE WILL OCCUR. PROPER ENGINE OIL LEVEL MUST
BE MAINTAINED TO ACHIEVE MAXIMUM ANGLE OF OPERATION OF 25°. (See
Engine Owner’s Manual for proper oil level.)
• DO NOT OPERATE AROUND WATER, GAS, POWER OR PHONE LINES. IF IN
DOUBT, CHECK BEFORE GRINDING.
• WEAR FACE SHIELD AND HEARING PROTECTION.
• KEEP CLEAR OF CUTTING WHEEL AND MOVING MACHINE PARTS.
• KEEP SPECTATORS AWAY.
• Position the machine at stump with cutter wheel
a slight distance away from stump. Do not
engage cutter wheel when backing up to
stump. Hitting the stump with cutter wheel
running will break the Poly Chain® belt.
• Remove tongue safety pin before beginning to
cut stump.