Installation guide

11
Go Power! Inverter DC Installation Kits
For a safe battery and
inverter connection
Go Power! DC Installation Kits include
everything you need to properly connect your
Go Power! inverter to the batteries. The DC
Installation Kit includes 10’ large gauge battery
cables, tie downs, lugs and the appropriate
inverter fuse and mounting block.
Go Power! DC Inverter Fuse Blocks
Go Power! DC Inverter Fuse Blocks include extra heavy duty class-T DC rated inverter fuses, with “slow
blow” characteristics suitable for inverter installations. Protect yourself and your equipment! Includes
mounting block, fuse and protective cover. (Note: automotive fuses are not recommended for use in an
inverter installation due to arcing or welding risk, which may result in a re).
Model:
FBL-110 110 amp DC fuse block
FBL-200 200 amp DC fuse block
FBL-300 300 amp DC fuse block
FBL-400 400 amp DC fuse block
Model:
F-110 110 amp replacement fuse
F-200 200 amp replacement fuse
F-300 300 amp replacement fuse
F-400 400 amp replacement fuse
12 VOLT Inverter Size 24 VOLT
Inverter Size
GP-DC-KIT 2
600-1000 W
GP-DC-KIT 2
600-1800 W
GP-DC-KIT 3
1100-1800 W
GP-DC-KIT 3
2000-3000 W
GP-DC-KIT 4
2000-2500 W
GP-DC-KIT 4
3100-4000 W
GP-DC-KIT 5
2600-3000 W
GP-DC-KIT 5
4100-6000 W
GP-SWR-B Remote
The GP-SWR-B Remote features an LED bar
graph, on/off switch and 25 ft. cable. It can be
used with the GP-SW1000, GP-SW2000, and
GP-SW3000.
Go Power! Modied Sine Wave Remote
GP-Remote
The GP-Remote can be used for the GP-1750HD and GP-3000HD
inverters. It features an LED indicator showing inverter status, on/off
switch and 25’ cable.
GP-SW-Remote
The GP-SW-Remote is used for the GP-SW1500 inverters. It features an
LED indicator showing inverter status, on/off switch and 25’ cable. In
addition, the GP-SW-Remote also allows you to switch between power
modes (full invert and power save).
Inverter Accessories
Go Power! Pure Sine Wave Remotes