Owner`s manual

GP-PWM-30
________________________________________________________________________
6.0 Operating Instructions
Power Up
When
the GP-PWM-30 is
connected to the battery, the
GP-PWM-30 will go into Power
Up mode.
Icons Displayed: Three
horizontal dashes
Setting the Battery Type / Charging Profile
Set the Battery Type / Charging
Profile by holding down the B
Button for 5 seconds. When the
display shows a single digit
number, release the B Button.
Set the Battery Type by toggling
through the Charging Profile
numbers 1, 2 or 3 by pressing
the B Button.
NOTE: Non-volatile memory: Any settings made on the GP-PWM-30
will be saved even when the power has been disconnected from the
controller.