Instruction Manual

7000-50 & 7000-75 Series Operations Manual Rev A 1/6/2014 Page 49 of 71
SECTION 9 – ALERTS
Alert System Overview
The chamber control system is equipped with an Alert system that constantly monitors
features of the chamber and to notify the user is if the cabinet needs any type of
service that may need done, to ensure good running performance of the chamber. The
intent is to notify the user that the chamber needs attention thus minimizing the risk of
a failure or alarm condition. Some of the alert features are replace the atomizers
(humidified units only), replace the air filter, and equipment calibration is due.
Notification occurs via an Alert icon on the status bar. When the Alert icon is pressed,
a pop up window will display the alert condition(s). Each alert condition parameter is
factory pre-set, no adjustment is necessary. The Alerts are cleared through the
Maintenance screen.
Press the (Alert icon).
The Alert pop up window will appear displaying the alert message.
Alert icon