OPERATING INSTRUCTIONS FOR CARPET PRO HEAVY DUTY UPRIGHT VACUUMS MODELS : CPU-1 CPU-2 CPU-1T CPU-2T Before operating the vacuum, please read these instructions completely.
Index Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Two-Wire Polarization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Grounding Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Parts Identification . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
Two-Wire Polarized Cord MODELS CPU-1 and CPU-1T This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug.
Parts Identification Handle grip Quick cord release Handle tube Power cord Cord storage hooks On/Off switch Bag compartment cover latch Bag compartment Accessory attachment opening Tools (CPU-1T andCPU-2T only) Nozzle hose Headlight Nozzle hose (CPU-1 and CPU-1T only) Foot pedal release Furniture guard Self-adjusting nozzle Thermal reset button Model specification plate Thermal reset instructions Replacement Bags/Filters 4 • Genuine Carpet Pro Vacuum Bags Part # 06.153 3 pk.
How to Assemble and Operate the Vacuum How to Attach the Handle to the Vacuum Cleaner The vacuum cleaner and the handle are packed separately. 1. After first removing the handle screw, insert handle into the hole on top of the vacuum cleaner. Make sure that the cord hooks on the handle are positioned to the back of the vacuum cleaner (Fig. 1). 2. Line up the small hole on the handle with the small hole on the vacuum cleaner and insert the screw. Make sure the screw is tightened securely. 3.
Handle Adjustments The handle on this vacuum cleaner can be set to one of three positions – upright, middle or low. How to Adjust the Handle 1. To release the handle, step on the pedal at the left rear corner of the vacuum cleaner (Fig.1). 2. Upright position – for when cleaning tools are being used or for storage (Fig 2). Handle locks in this position. 3. Middle position – for normal cleaning (Fig. 3). 4. Low position – for cleaning under furniture (Fig. 4).
Automatic Self-Adjusting Nozzle Your Carpet Pro upright vacuum cleaner is designed with an Automatic Self-Adjusting Nozzle. No manual adjustments are required. The height of the nozzle is instantly and automatically adjusted to carpet pile height. This self-adjusting feature allows the nozzle to float evenly over all carpet pile surfaces. Optional Cleaning Tools/Accessories Deluxe Attachment Set 05.119 (Fig.
How to Replace the Vacuum Belt and Headlight Bulb CAUTION: Unplug the vacuum cleaner before performing any of these steps. How to Remove the Bottom Plate 1. Place the vacuum cleaner in the low position by pressing the handle release pedal twice. Turn the vacuum over. 2. Remove the two screws holding the bottom plate in place (Fig. 1). 3. Remove the bottom plate. Fig. 1 How to Replace the Belt 1. Turn the unit over and remove the bottom plate as described in the above section. 2.
How to Clean the Nozzle Hose CAUTION: Unplug the vacuum cleaner. The nozzle hose, located on the back of the vacuum cleaner, carries the dirt from the nozzle to the vacuum bag. The hose also functions as the attachment cleaning hose (on CPU-1T and CPU-2T models only). If the hose should become clogged 1. Pull out and turn the lid of the cleaning attachment opening. Remove the clog or blockage (Fig.1). 2. If the above step is not enough, remove hose cuff from the attachment port inlet (Fig. 2).
Thermal Fuse Protection Your Carpet Pro vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector. This thermal protector is designed to protect your vacuum cleaner from overheating due to a cutoff in airflow (i.e. clogged hose, operating the vacuum without a bag). Should this situation occur, the thermal fuse protector will safely shut off your vacuum cleaner to avoid any potential damage.
Carpet Pro Vacuum Cleaners PO Box 730 Fenton, MO 63026 Should your vacuum ever need service, simply contact the retailer where original purchase was made. 2010 Carpet Pro Vacuum Cleaners.
