SDS

While we believe them to be reliable, the statements and information herein are only for general guidance
and are not warrants or guarantees for accuracy and completeness. The user must, by test or otherwise,
determine suitability for this purpose. There is no warranty of fitness for a particular purpose. Our standard
term and conditions of sale apply exclusively to all orders, and all liability for damages of any kind, including
consequential, exceeding purchase price is excluded. No one is authorized by us to make oral warranties.
We reserve the right to make changes without notice or obligation in our products and publications.
4-15
1
Ingredient C.A.S. No. Weight (%)
Polyolefin None 100
SECTION II - Hazard(s) Identification
SECTION III - Composition / Information on Ingredients
SECTION IV - First-aid Measures
SECTION V - Fire-fighting Measures
Company Identification: Surface Shields
10457 163rd Pl
Orland Park, IL 60467
Technical Services Help Desk: [phone]
Boiling Point: N/A
Vapor Pressure: N/A
Vapor Density: N/A
Evaporation Rate: N/A
Solubility in Water: 0.0%
Specific Gravity: <1,000
PercentPercent Volatile: N/A
pH: N/A
Viscosity: N/A
Melting Point: 150 Degrees to 400 Degrees F
Appearance and Odor: N/A
Flash Point: 345 Degree C
Flammable Limits - LEL: 340 Degree C
Flammable Limits - UEL: 346 Degree C
Auto Ignition Temperature: N/A
Extinguishing Media: Carbon Dioxide or Water Spray
Special Fire Fighting Procedures:Special Fire Fighting Procedures: Contained breathing apparatus
recommended
Unusual Fire and Explosion Hazards: Dense smoke may be emitted
when product burns
NFPA Hazard Codes: N/A
OSHA Fire Hazard Class: N/A
Stability Data: Stable
Incompatibility-Materials/Conditions to Avoid: High heat and flames
Hazardous Polymerization: Hazardous polymerization will not occur
Hazardous Decomp. Products: Carbon and nitrogen oxides
No anticipated toxicological hazards under handling methods
SECTION I - Identification
SECTION VI - Safe Handling and Leak Procedures
Eye Contact: Immediately flush eyes with large amounts of water.
Get immediate medical attention.
Skin Contact: No need for first aid is anticipated
Inhalation: No need for first aid is anticipated
If swallowed: No need for first aid is anticipated
Procedure if material is released: N/A
Disposal Method: Refer to local, state and federal
regulations for solid non hazardous
disposal
Handling and storage precautions: No anticipated hazards under normal
storage and handling methods
SECTION VII - Handling and Storage
Eye Protection: Avoid eye contact
Skin Protection: N/A
Recommend Ventilation: N/A
Respiratory Protection: N/A
Prevention of Accidental Ingestion: N/A
Recommend Storage: Store in a cool place
Fire and ExplosionFire and Explosion Avoidance: N/A
Exposure Limits
Ingredient Value Unit Type Auth Skin
None None None None
Source of Exposure Limit Data: Not established
SECTION VIII - Exposure Controls / Personal Protection
SECTION XI - Physical and Chemical Properties
Maximum Product Application Duration: Six Months
Storage Location: Indoors, Dry location
Temperature Range: 45 Degrees- 90 Degree F
Relative Humidity Range: 20% to 80%
Conditions to Avoid: Water, Oils, other contaminants and
direct UV light
Adhesive Type: Acrylic Copolymer Formulation
Adhesive Base: Water
Chemical Activity: Extremely Inert
Properties: High tack, formulated for textured surfaces
Date of Last Revision: 04/28/2015
Eye Contact: Eye contact is not expected to occur during normal
use of the product. Mechanical eye irritation: signs
symptoms can include irritation, redness, scratching
of the cornea and tearing.
Skin Contact: No adverse health effects are expected from skin contact.
Inhalation: No adverse health effects expected from inhalation.
SECTION X - Stability and Reactivity
SECTION XI - Toxicological Information
SECTION XVI - Other Information
SDS
CARPET SHIELD