User Manual

Hoop II Multi-Mount Step Installation Instructions
Part No’s:104811 / 104812 / 104814
THIS STEP FITS THE FOLLOWING VEHICLE:
FORD
‘99-’14 Super Duty all Cabs/all doors/all series
‘00-‘02 Excursion all doors
Quality and Style that Endures
Follow the diagram and the
written directions carefully for a
proper, safe installation.
Should you encounter an
unusual, unforeseen problem,
contact our Technical Help Line
7:00 AM – 3:00 PM Pacific Time
[phone]
Visit our web-site at
www.CARR.com
Carr Pattern Co., Inc.
Quality and Style that Endures
Follow the diagram and the
written directions carefully for a
proper, safe installation.
Should you encounter an
unusual, unforeseen problem,
contact our Technical Help Line
7:00 AM – 3:00 PM Pacific Time
[phone]
Visit our web-site at
www.CARR.com
Carr Pattern Co., Inc.
Bracket Mounting
Face
Vehicle Body Metal
MATERIALS NEEDED: Drill motor, 3/8" drill bit, 1/4" drill bit, 1/8" drill bit,
pencil, Phillips screw driver, center punch, two ½" wrenches, two 7/16" wrenches,
silicone.
MATERIAL FURNISHED:
Two step castings, four steel mounting brackets, instruction page and two hardware
packs (Important! Not all of the parts in these hardware packs may be needed
for proper installation).
WAX YOUR STEP ON A
REGULAR BASIS TO
MAINTAIN ITS LUSTER
Angled Reinforcing
Metal
Pinch Weld
5/16 Jam Nuts
Mark vertical center
line on the outside
painted surface of the
pinch weld