Owners manual

Super Hoop Multi-Mount Step Installation Instructions
Part No’s: 124871 / 124872 / 124874
Quality and Style that Endures
Follow the diagram and the
written directions carefully for a
proper, safe installation.
Should you encounter an
unusual, unforeseen problem,
contact our Technical Help Line
7:00 AM – 3:00 PM Pacific Time
[phone]
Visit our web-site at
www.CARR.com
Carr Pattern Co., Inc.
Quality and Style that Endures
Follow the diagram and the
written directions carefully for a
proper, safe installation.
Should you encounter an
unusual, unforeseen problem,
contact our Technical Help Line
7:00 AM – 3:00 PM Pacific
Time
[phone]
Visit our web-site at
www.CARR.com
Carr Pattern Co., Inc.
Vehicle body metal
WAX YOUR STEP ON A
REGULAR BASIS TO
MAINTAIN ITS LUSTER
Vehicle Application:
FORD
‘99-‘12 Super Duty PU all Cabs/all doors/all series
‘00-‘04 Excursion all doors
MATERIAL NEEDED:
Drill motor, 3/8” drill bit, 1/8” drill bit, ¼” drill bit, pencil, Phillips screw driver,
center punch, two ½” wrenches, two 7/16” wrenches, and silicone.
MATERIAL FURNISHED:
Two castings, four steel mounting brackets, instruction page and two hardware
packs. (Important! Not all of the parts in these hardware packs may be needed
for proper installation).
Bracket Mounting Face
Angled Reinforcing Metal
5/16 Jam Nuts
Vehicle Body Metal
Mark vertical center
line on the outside
painted surface of the
pinch weld