Network Device Installation and User's Guide

4-8 9/24/01
Figure 4-3: Rack Mounting on a 19” Rack Using Heavy-Duty Brackets
1. Remove the small
brackets from the unit.
2. Fasten heavy-duty
brackets to unit as
shown.
3. Mount the unit on the
standard rack using four
10-32 x 3/4" machine
sc rews.
4. Adjust the offset by sliding
the screws in the bracket
slots, then tighten the screws.
NOTE: To mount units in standard
EIA 23" racks, use heavy-duty
bracket CAC PN 004-0113.
19" Heavy-duty mounting
brackets CAC PN 004-004
1