Network Device Installation and User's Guide

About This Chapter
9/24/01 7-1
Chapter 7
Remote Monitor
Contents of This Chapter:
7.1 About This Chapter
This chapter describes how to initialize and configure the Access Bank II - SNMP for first time basic
operation in the Remote mode using the MS Windows-based Remote Monitor GUI software program
installed on an external IBM-compatible Laptop or PC.
Procedures are provided for:
• Installing the Remote Monitor software program
• Logging into the PC database
• Selecting a profile and default configuration
• Modifying Selecting Cross-Connect configurations
• Configuring the Dual T1 Hardware Interfaces
• Configuring the V.35 DCE Data Port
• Configuring the RS-232 Management Port
• Enabling Alarm Reporting to Pagers and Remote Printers
A more detailed explanation of the operation of the Remote Monitor is provided in the Remote Mon-
About This Chapter .................................... 1
Remote Monitor Software Program ........... 2
Overview .................................................... 2
Message Traffic ......................................... 3
Online Help ................................................ 3
Hardware Requirements ............................ 3
Installation .................................................. 3
Remote Monitor Screen Hierarchy ............ 4
Initialize for Operation in the Remote Mode 4