User's Manual

3-64 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Privileged Mode
show voice-port fxs
Use the show voice-port fxs command to display the FXS voice port information.
Syntax: # show voice-port fxs
Example: adit 3500# show voice-port fxs
Registration Address: 172.32.1.15
SIP Proxy: Yes
Proxy Address: 172.32.1.18
* Line UID PhoneStatus RegisStatus RX/TX/Lost(Pkts) Jitter Overflow
----------------------------------------------------------------------------
Y 1 3035550001 Idle Registered
Y 2 3035550002 Idle Registered
Y 3 3035550003 Idle Registered
Y 4 3035550004 Idle Registered
Example: adit MSR# show voice-port fxs
Registration Address: 172.32.1.15
SIP Proxy: Yes
Proxy Address: 172.32.1.18
* Line UID PhoneStatus RegisStatus RX/TX/Lost(Pkts) Jitter Overflow CrossConnect
------------------------------------------------------------------------------------------
Y 1 3035550001 Idle Registered Connected
Y 2 3035550002 Idle Registered Connected
Y 3 3035550003 Idle Registered Connected
Y 4 3035550004 Idle Registered Connected
Y 5 3035550005 Idle Registered Connected
Y 6 3035550006 Idle Registered Connected
Y 7 3035550007 Idle Registered Connected
Y 8 3035550008 Idle Registered Connected
.
.
.
Supported Platforms: Adit 3104, Adit 3500, MSR