User's Manual

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-3
User Mode
exit
Use the exit command to close your current connection if you are in User mode or Privileged mode. If
the command is entered in a subconfiguration mode (Interface or Routing), this command takes you to
the previous level (example: back to Privileged mode from Interface configuration mode).
Syntax: > exit
Example: Adit 3500> exit
Adit 3500 Username:admin
Adit 3500 Password:********
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
help
Use the help command to display help information. This can also be accomplished with a ?. This
command can be entered in any Configuration mode.
Syntax: > help
or
> ?
Example: Adit 3500> help
? Display all commands
date Display time/date
enable Enter Privileged mode
end Logout from the device
exit Exit from the current level
help Display all commands
history Display past entered commands
ping Ping a remote host
show Show various system information
traceroute Traceroute to a remote host
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR