User's Manual

3-34 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Privileged Mode
show config voice-port trunk
Use the show config voice-port trunk command display the Trunk port information.
Syntax: # show config voice-port trunk port
Example: adit 3500# show config voice-port trunk 1
Voice-port Trunk 1
description Trunk 1
trunk 000000005
no comfort-noise
connection t1 2
no echo-cancel
input-gain 0
output-gain 0
isdn switch-type pri-ni2
no digit-map
no registration enable
Example: adit MSR# show config voice-port trunk 1
Voice-port Trunk 1
description Trunk 1
trunk 000000005
no comfort-noise
echo-cancel enable
input-gain 0
output-gain 0
isdn switch-type pri-ni2
no digit-map
no registration enable
Supported Platforms:
Adit 3500, MSR
Field Definition
port Trunk port to display. Value must be 1.