User Guide

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-41
Global Configuration Mode
Global Configuration Commands
no ipsec log ipsec
Use the no ipsec log ipsec command to disable IPSec related logs. To enable IPSec logging, see ipsec
log ipsec command on page 4-23
Syntax: (config)# no ipsec log ipsec {atc|emvc|etc|ip-ctc|irtmc|mirl
|rc|rtmc|satmc|tc|tsmc|ttc|usc|vrp}
Example: (config)# no ipsec log ipsec tc
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ipsec replay
Use the no ipsec authentication-retries command to disable anti-replay protection. To enable the anti-
replay protection, see the ipsec replay command on page 4-24.
Syntax: (config)# no ipsec replay
Example: (config)# no ipsec replay
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
atc Authentication Transforms Code.
emvc Even More Verbose Output.
etc Encryption Transforms Code.
ip-ctc IP Compression Transforms Code.
irtmc Internal Route Table Manipulation Code.
mirl Print all IPSec Messages Ignoring Rate Limit.
rc Receive Code.
rtmc Radij Tree Manipulation Code.
satmc Secure Association Table Manipulation Code.
tc Tunneling Code.
tsmc Transform Selection and Manipulation Code.
ttc Tunneling Transmit Code.
usc User-Space Communication Code.
vrp Verbose Rejected Packets.