User Guide

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 5-5
Configuration - LCC Controller Mode
history
Use the history command to display commands that have been entered in this session. This command
can be entered in any configuration mode.
Syntax: (config-cont-lcc-{n})# history
Example: (config-cont-lcc-1)# history
history
description Test-LCC
no shutdown
history
Supported Platforms:
MSR
no command
no shutdown
Use the Controller LCC no shutdown command to set the LCC up (in-service). To set the LCC
down (Out-of-Service), see the shutdown command on page 5-6.
Syntax: (config-cont-lcc-{n})# no shutdown
Example: (config-cont-lcc-1)# no shutdown
Supported Platforms:
MSR