Network Device User Manual

7-60 Broadmore 1750 - Release 4.6

Configuration

Unstructured E3-3 SAM

Table 7-15: Unstructured E3-3 SAM Alarm Configuration

Follow the sequence below to set network alarms. E3 alarms are set on a port basis with

alarm definitions as shown.

Network Alarms Options Service Alarms

Cell Starvation Ignore/Major/Minor LOS

LOF Ignore/Major/Minor LOF

AIS Ignore/Major/Minor AIS

RDI Ignore/Major/Minor RDI

Sequence Errors Ignore/Major/Minor Line Code Violation

Excessive SNP Errors Ignore/Major/Minor Excessive F-bit Errors

Excessive F-bit Errors Ignore/Major/Minor Excessive Parity Errors

Excessive Parity Errors Ignore/Major/Minor Excessive FEBE Errors

Excessive FEBE Errors Ignore/Major/Minor

Select System Management ↵

Select Configure ↵

Select Slot with DS3 ↵

Select Port of interest ↵

Adjust settings using the spacebar ↵

Select Alarm Configuration ↵

Select Network Alarms ↵

Select Escape and save settings as desired

↵

Press Service Alarms

↵

Repeat the procedure to set and save Service Alarms ↵