User manual

Adit 600 - Release 10.1.1 15
Quick Start
Interface Connectors
9. Plug connector in the Adit 600 -48 VDC connector, as seen in the graphic and
secure with set screws.
Power Cord DC
There is no power cable provided with the 24
VDC Power Supply, however the connector is
provided. This connector will need to be wired,
the following chart prides the wire gauge
recommended.
To connect 24 VDC power:
1. Ensure that no power is present on the two wires to be connected.
WARNING! POSSIBLE SHOCK HAZARD EXISTS, PLEASE FOLLOW INSTRUCTIONS
CAREFULLY.
1(+) 2(-)
Connector
Provided connector (female)
of Adit 600
on back
(male)
Battery
-48 VDC
2(-)
Battery
Return (+)
-48 VDC (-)
Return 1(+)
24 VDC
6 Amp
Battery
Battery (+)
DC Power Connector
Return (-)