User manual

22 Adit 600 - Release 10.1.1

Quick Start

Interface Connectors

10Base-T Ethernet

The 10Base-T Ethernet (female) port to connect to a remote

management tool such as Telnet or an SNMP-based Network

Management System. Note: A LINK LED on the back of the unit

displays green when the system has a good Ethernet link.

The pinouts are as follows:

Ethernet (RJ-45)

NOTE: This Ethernet port uses a "hub" pinout. Use a straight-through cable

to connect a PC.

Pin Name Description

1 Receive + Receive from network

2 Receive - Receive from network

3 Transmit + Transmit to network

4 - 5 N/C Not connected

6 Transmit - Transmit to network

7 N/C Not connected

8 N/C Not connected