User manual

26 Adit 600 - Release 10.1.1
Quick Start
Configuration
Initial Setup
Use the following commands for your initial setup. For further information see the Adit
600 User Manual.
Command Description
set local off Disables DIP switches.
set date {mm/dd/yyyy} Set the date used for event logging.
set time {hh:mm:ss} Set the time used for event logging.
set id {"id-name"} Set a system ID name.
set clock1 {slot:port}
internal
Set the primary clock source.
set clock2 {slot:port}
internal
Set the secondary clock source.
set ethernet ip address
{ip-addr} {mask}
Set the ethernet IP address, in the
conventional IP address format.
set ip gateway {ip-addr} Set the IP gateway, in the conventional IP
address format.