User manual

2-2 Adit 3104 - Release 1.6

Physical Installation

Unpacking and Inspection

WARNING! OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES.

1. Inspect containers for damage during shipment. Report any damage to the freight carrier for

possible insurance claims.

2. Compare packing list with office records. Report any discrepancies to the office.

3. Open shipping containers, be careful not to damage contents.

4. Inspect contents and report any damage.

5. If equipment must be returned for any reason, carefully repack equipment in the original

shipping container with original packing materials if possible.

6. If equipment is to be installed later, replace equipment in original shipping container and store

in a safe place until ready to install.

Installation Environment

The environment in which you are installing the Adit 3000 must meet the following conditions:

 Operating temperature range: 32° to 104° F (0° to 40° C)

 Storage temperature range: -40° to 158° F (-40° to 70° C)

 Maximum operating altitude: 10,000 ft. (3,048 m)

 Maximum non-operating altitude: 40,000 ft. (12,192 m)

 Relative humidity (non-condensing) range: 0 to 95%

WARNING! THE ADIT 3000 IS DESIGNED FOR WALL AND RACK MOUNTING ONLY. IT IS NOT

DESIGNED FOR DESKTOP USE.