User manual

3-8 Adit 3104 - Release 1.6

Electrical Installation & Cabling

Interface Connectors

10/100Base-TX Ethernet

The 10/100Base-TX Ethernet (female) ports provide connectivity for Router

WAN and/or LAN ports and for management connection via Telnet and/or

SNMP to a Network Management System.

Ethernet (RJ-45)

The pinouts are as follows:

Note: This is a hub pinout, you will need a straight cable to connect to a PC.

The LEDs are as follows:

Pin Name Description

1 Receive + Receive from network

2 Receive - Receive from network

3 Transmit + Transmit to network

4-5 N/C Not connected

6 Transmit - Transmit to network

7-8 N/C Not connected

LED State Description

Left LED The left LED shall show Link Status.

Off Link Down

Green Link Up

Flashing Green Traffic on Link

Yellow Collision status

Right LED The right LED shall indicate Link Speed.

Off 10 Mbit/sec, down or not connected

Green 100 Mbit/sec

8 1