Carrier 30GX080-265 : Specifications : Page 63

63

Review and record field configuration, <2> <SRVC>

External reset sensor ...................................................................

Cooler pump interlock ................................................................

Cooler fluid select........................................................................... Cooler pump control ...................................................................

Minimum load select ...................................................................... Condenser pump control* ...........................................................

Loading sequence select ................................................................. Condenser flow switch*..............................................................

Lead/lag sequence select ................................................................ Condenser water sensors*...........................................................

Head pressure control .....................................................................

Motormaster select* ....................................................................... *If installed

Water valve type* ...........................................................................

To start the chiller

WARNING

Be sure that all service valves are open, and all pumps are on before attempting to start this machine. Once all checks have been

made, move the switch to "LOCAL" or "REMOTE" from "OFF".

Unit starts and operates properly

Temperatures and pressures

WARNING

Once the machine has been operating for a while and the temperatures and pressures have stabilized, record the following

Cooler EWT.................................................................................... Ambient temperature (GX) .........................................................

Cooler LWT .................................................................................... Condenser EWT ..........................................................................

Condenser LWT ..........................................................................

Circuit A oil pressure ...................................................................... Circuit B oil pressure ..................................................................

Circuit A suction pressure .............................................................. Circuit B suction pressure ...........................................................

Circuit A discharge temperature ..................................................... Circuit B suction temperature .....................................................

Circuit A suction temperature ......................................................... Circuit B discharge pressure .......................................................

Circuit A discharge pressure ........................................................... Circuit B discharge temperature .................................................

Circuit A liquid line temperature .................................................... Circuit B liquid line temperature ................................................

NOTES:

................................................................................................................................................................................................................