Specifications

12
3.5 - Multiple chiller installation
NOTE: If the walls are higher than 2 m, contact the factory.
Legend
A Wall
B Units
Notes:
Unit must have clearances for air flow as follows:
Top: do not restrict in any way
In case of multiple chillers (up to four units), the respective clearance between
them should be increased from 1830 to 2000 mm for the side space requirement.
If necessary, add the required clearances for evaporator tube removal.
Surface solide
2000
1830
2000
1830
20002000
1525
1525
A
B
B
B
B
B
B
B
B
A