Product data

Typical wiring schematics — size 030 cooling only system

NOTES:

1. If any of the original wire furnished must be replaced, it must

be replaced with Type 90° C wire or its equivalent.

2. Wire in accordance with National Electrical Code (NEC) and

local codes.

3. Thermistor wiring cable 32 ft long provided with indoor unit.

4. Compressor and fan motors are protected by internal thermal

overloads.

5. Indoor unit shown with power source from outdoor unit. Indoor

unit may be wired to separate power source, depending on

service requirements.

Terminal (Marked)

Splice

Terminal (Unmarked)

Terminal Block

Factory Wiring

Field Control Wiring

Field Power Wiring

Accessory or Optional Wiring

C—Contactor

CC — Compressor Capacitor

COMP — Compressor

FC — Fan Capacitor

GND — Ground

IFM — Indoor Fan Motor

OFM — Outdoor Fan Motor

RVS — Reversing Valve Solenoid

SW — Sweep Motor

TB — Terminal Block

TH — Thermistor/Thermostat

LEGEND