User`s guide

Chapter 3 123
Pass/Fail Limit (Specification) Descriptions
15. TXA Compressor Tracking Error >0dB (dB)
15. TXA Compressor Tracking Error >0dB (dB)
This sets the pass/fail limits used when the compressor output level is
measured at input levels above the 0 dB reference level. The output
voltage tolerance should be within the pass/fail limits. Lower and
Upper Limits must be entered in dB.
Pass/fail limits are determined by using any applicable standard, such
as:
• EIA/TIA Standard: Compressor
Example
If you desire the output voltage tolerance below the 0 dB reference level
to be
±0.5 dB, enter −0.5 as the Lower Limit and 0.5 as the Upper
Limit.