User`s guide

Chapter 3 145

Pass/Fail Limit (Specification) Descriptions

37. TXA Signaling Tone Frequency (kHz)

This sets the pass/fail limits for the signaling tone’s frequency accuracy.

Upper and lower limits must be entered in Hz.

Pass/fail limits are determined by using any applicable standard such

as:

• EIA/TIA Standard: Signaling Tone (ST)

Example

If you desire that the Signaling Tone frequency should be 10 kHz ±1 Hz,

enter 9.999 as the Lower Limit and 10.001 as the Upper Limit.