User`s guide

Chapter 4 177

Parameter Descriptions

19. RT Rate Set Selection [0=9600 1=14400]

This parameter is used to set the proper service option in the CDMA

CALL CONTROL screen. Parameter 18. RT Prot Std [0=95 1=95A

2=TSB74 3=ARIB] must be set to 2 (TSB-74) if this parameter is set to

1 and the user expects the software to do rate set 2 (14400) testing. If

parameter 18. RT Prot Std [0=95 1=95A 2=TSB74 3=ARIB] is set to 0 or

1 then this parameter is ignored by the software and rate set 1 is

always used. Rate set 2 is not supported with IS-95 and IS-95A protocol

standards. The value must be entered as 0 or 1:

Example

If you want to test at rate set 2, enter 1 as the value.