User`s guide

Chapter 2 67
Test Descriptions
TEST_30 - CPD Registration
TEST_30 - CPD Registration
Description
This test performs a CDMA registration on the mobile station as
follows:
1. An analog release is performed if the MSUT is on an analog voice
channel.
2. A CDMA release is performed if the MSUT is on a digital traffic
channel.
3. A standard CDMA setup for call processing is performed. The
standard CDMA setup performs the following instrument functions:
a. Sets Sector A Power to a level set in parameter 22. RX RF Level
for Signaling (dBm).
b. Sets the RF Channel to the present channel as defined in the
TESTS (Channel Information) screen.
4. The MS Database is cleared to make sure the registration data is
current.
5. A command is sent to the Test Set to register the MSUT and wait
until the MSUT has registered or the registration attempt times out.
If the registration times out, the operator is asked if the registration
test should be repeated or aborted by selecting the appropriate
softkey. The registration will continue to be repeated if the
registration times out and the operator answers ‘Yes’ to the question
“Select ‘Yes’ to repeat registration, ‘No’ to abort.” and will abort the
test only if the operator selects ‘No’. This is done for phones that for
one reason or another take a long time (>30 seconds) to go into
service after testing is started.