Installation manual

GB-20
Controls
Warning: disconnect the power supply
before opening the control unit cover.
The unit can be used in conjunction with
the infrared remote control or the “Room
Controller” or “Zone Manager” cable type
remote control (optional accessories).
Instructions for use of the cable-type and
infrared remote controls are included in the
respective manuals.
The control units must be opened and
installed by qualified personnel only.
IR remote control “Room Controller” “Zone Manager”
Selecting S.HI speed
the unit is configured for three speeds, LO-
ME-HI. To select S.HI speed, proceed as
follows:
• open the cover of the unit’s electrical
panel;
• move the faston “A” connector (with the
brown wire“B”), to faston “C” (black wire);
• close the unit’s electrical panel again.
A
B
C
J7
40DQV_GB_install 5-07-2005 11:44 Pagina 20