Manualshelf

Owner's Manual

ManualsBrandsCarrier ManualsAir Conditioners18,000 BTU Indoor Air Conditioner with Heat Pump, Variable Speed, Built-in Base Pan Heater, Built-in Condensate Pump, 5 Modes, Auto Timer, One Touch Memory, Follow Me Feature, Wired Remote Control, Wireless Remote Control and Energy Star Qualified
11121314151617181920
Maintenance after a long stop period
Check and remove everything that might be blocking inlet and
outlet vents of indoor units and outdoor units.
Clean air filters and casings of indoor units.
Refer to "Cleaning the air filter" for details on how to proceed
and make sure to install cleaned air filters back in the same
position.
Maintenance before a long stop period
Let the indoor units run in fan only operation for about half a day
in order to dry the interior of the units.
Clean air filters and casings of indoor units. Refer to " Cleaning
the air filter" for details on how to proceed and make sure to
install cleaned air filters back in the same position.
Check and remove everything that might be blocking inlet and
outlet vents of indoor units and outdoor units.
Clean air filters and casings of indoor units.
Refer to "Cleaning the air filter" for details on how to proceed
and make sure to install cleaned air filters back in the same
position.
Turn on the power at least 12 hours before operating the unit in
order to ensure smoother operation. As soon as he power is
turned on, the remote controller displays appear.
Cleaning the air filter(on some models)
The air filter can prevent dust or other particulate from entering
the unit. In case of blockage of the filter, the working efficiency of
the air conditioner may greatly decrease.
Therefore, the filter must be cleaned once every two weeks
during long time usage.
If the air conditioner is installed in a dusty place , clean the the air
filter frequently.
If the accumulated dust is too heavy to be cleaned , please
replace the filter with a new one(replaceable air filter is an
optional fitting).
If your unit is a rear ventilated model, please remove the filter
fixed screws（2 screws）and pull the filter away from the unit.
If your unit is a descensional ventilated model, please push the
filter up slightly to let the position retainer move away from the
flange fixed holes, and take off the filter according to the arrow
direction shows in the following fig.
Fig.5-4
Fig.5-3
Clean the air filter (vacuum cleaner or pure water may be used
to clean the air filter. If the dust accumulation is too heavy ,
please use asoft brush and mild detergent to clean it and dry
out in cool place) .
Fig.5-2
Fig.5-1
20