Spec Sheet

ManualsBrandsCarrier ManualsAir ConditionersMini Split Air Conditioner Cooling Area,

Table Of Contents

Specifications subject to change without notice.

Fig. 1 — Sizes 09 to 24

Fig. 2 — Remote Controller

NOTE: Images are for illustration purposes only. Actual models may

differ slightly.

TABLE OF CONTENTS

INDUSTRY LEADING FEATURES / BENEFITS........................ 1

MODEL NUMBER NOMENCLATURE ....................................... 3

STANDARD FEATURES AND ACCESSORIES ......................... 4

DIMENSIONS ................................................................................. 5

CLEARANCES................................................................................ 8

SPECIFICATIONS - COOLING ONLY......................................... 9

SPECIFICATIONS - HEAT PUMP ................................................ 10

APPLICATION DATA ................................................................... 11

WIRING........................................................................................... 12

AIR FLOW DATA .......................................................................... 13

AIR THROW DATA ....................................................................... 13

MOISTURE REMOVAL................................................................. 14

SOUND PRESSURE ....................................................................... 14

FAN AND MOTOR SPECIFICATIONS........................................ 15

WIRING DIAGRAMS..................................................................... 16

GUIDE SPECIFICATIONS............................................................. 18

INDUSTRY LEADING FEATURES /

BENEFITS

A PERFECT BALANCE BETWEEN BUDGET

LIMITS, ENERGY SAVINGS AND COMFORT

The 40MHH series ductless systems are a matched combination of an

outdoor condensing unit and an indoor fan coil unit connected only by

refrigerant tubing and wires.

The fan coil is mounted on the wall, near the ceiling. This selection of

fan coils permits creative solutions to design problems such as:

• Add-ons to current space (an office or family room addition)

• Special space requirements

• When changes in the load cannot be handled by the existing

system

• When adding air conditioning to spaces that are heated by

hydronic or electric heat and have no ductwork

• Historical renovations or any application where preserving the

look of the original structure is essential.

The ideal compliment to your ducted system when it is impractical or

prohibitively expensive to use ductwork. These compact indoor fan

coil units take up very little space in the room and do not obstruct

windows. The fan coils are attractively styled to blend with most room

decors. Advanced system components incorporate innovative

technology to provide reliable cooling performance at low sound

levels.

Product Data

40MHH

High Wall Ductless System

Sizes 09 to 24

Summary of content (18 pages)

PAGE 1
40MHH High Wall Ductless System Sizes 09 to 24 Product Data INDUSTRY LEADING FEATURES / BENEFITS A PERFECT BALANCE BETWEEN BUDGET LIMITS, ENERGY SAVINGS AND COMFORT The 40MHH series ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires. Fig. 1 — Sizes 09 to 24 The fan coil is mounted on the wall, near the ceiling. This selection of fan coils permits creative solutions to design problems such as: Fig.
PAGE 2
: LOW SOUND LEVELS BUILT-IN RELIABILITY When noise is a concern, the ductless systems are the answer. The indoor units are whisper quiet. There are no compressors indoors, either in the conditioned space or directly over it, and there is none of the noise usually generated by air being forced through ductwork. Ductless system indoor and outdoor units are designed to provide years of trouble-free operation.
PAGE 3
: MODEL NUMBER NOMENCLATURE ,1'225 81,7 0+ + 4 )$1 &2,/ 81,7 92/7$*( 0+ 02'(/ ,1'225 )$1 &2,/ 7<3( + +,*+ :$// 6<67(0 7<3( + &22/,1* 21/< 4 +($7 3803 127 86(' 120,1$/ &$3$&,7< 721 721 7216 7216 127 86(' Use of the AHRI Certified TM Mark indicates a manufacturer’s participation in the program For verification of certification for individual products, go to www.ahridirectory.org.
PAGE 4
: STANDARD FEATURES AND ACCESSORIES Ease Of Installation Mounting Brackets Low Voltage Controls Comfort Features Microprocessor Controls Wired Remote Controller Wireless Remote Controller Automatic Up-Down Airflow Louver Swing Air Direction Control Auto Restart Function Cold Blow Protection on Heat Pumps Freeze Protection Mode on Heat Pumps Turbo Mode Auto Changeover on Heat Pumps Follow Me Energy Saving Features Sleep Mode Stop/Start Timer 46F Heating Mode (Heating Setback) Safety And Reliability Indoor
PAGE 5
: DIMENSIONS HIGH WALL UNIT SIZE 12K 9K 12K 18K 24K Voltage (115V) (208/230V) (208/230V) (208/230V) (20/230V) Height In. (mm) 11.81(300) 11.81(300) 11.81(300) 12.8(325) 13.41(341) Width In. (mm) 32.00(813) 28.53(725) 32.00(813) 38.36(974) 43.83(1113) Depth In. (mm) 7.75(197) 7.75(197) 7.75(197) 8.87(225) 9.22(234) Lbs (kg) 17.64(8) 16.53(7.5) 17.64(8) 23.15(10.5) 30.86(14) Lbs (kg) 22.49(10.2) 21.16 (9.6) 22.49(10.2) 31.97(14.5) 40.12(18.
PAGE 6
: DIMENSIONS (CONT) Units: Inches [mm] Fig. 4 — Dimensions Size 12K Units: Inches [mm] Fig. 5 — Dimensions Size 18K Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
PAGE 7
: DIMENSIONS (CONT) Units: Inches [mm] Fig. 6 — Dimensions Size 24K Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
PAGE 8
: CLEARANCES CEILING 6" (0.15m) min. 5" (0.13m) min. 5" (0.13m) min. 6' (1.8m) FLOOR Fig. 7 — Indoor Unit Clearances Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
PAGE 9
: SPECIFICATIONS - COOLING ONLY COOLING ONLY SYSTEM SIZE 12 9 12 18 24 40MHHC12---1 40MHHC09---3 40MHHC12---3 40MHHC18---3 40MHHC24---3 V/Ph/Hz 115-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 MCA Wireless Remote Controller (° F/° C Convertible) Wired Remote Controller (° F/° C Convertible) A. 0.3 0.25 0.25 0.4 0.
PAGE 10
: SPECIFICATIONS - HEAT PUMP HEAT PUMP SIZE Indoor Coil Piping Operating Range Controls Electrical SYSTEM Indoor Model V/Ph/ Hz Voltage, Phase, Cycle 9 12 18 24 40MHHQ12---1 40MHHQ09---3 40MHHQ12---3 40MHHQ18---3 40MHHQ24---3 115-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 Power Supply Indoor unit powered from outdoor unit MCA Wireless Remote Controller (° F/° C Convertible) Wired Remote Controller (° F/° C Convertible) A. 0.3 0.25 0.25 0.28 0.
PAGE 11
: APPLICATION DATA SUPPORT UNIT SELECTION Adequate support must be provided to support the weight of all the fan coils. Refer to the Physical Data section for fan coil weights, and the base unit dimensional drawings for the mounting bracket locations. Select equipment that either matches or is supports slightly more than the anticipated peak load. This provides better humidity control, fewer unit cycles, and less part-load operation.
PAGE 12
: WIRING All wires must be sized per NEC (National Electrical Code) or CEC (Canadian Electrical Code) and local codes. Use Electrical Data table MCA (minimum circuit amps) and MOCP (maximum over current protection) to correctly size the wires and the disconnect fuse or breakers respectively. Per the caution note, only stranded copper conductors with a 600 volt rating and double insulated copper wire must be used. The use of BX cable is not recommended.
PAGE 13
: AIR FLOW DATA COOLING ONLY Indoor (CFM) 12K (115V) 9K (208/230V) 12K (208/230V) 18K (208/230V) 24K (208/230V) Turbo 328 286 335 550 640 609 High 301 260 305 506 Medium 239 224 238 422 519 Low 190 177 188 344 420 12K (115V) 9K (208/230V) 12K (208/230V) 18K (208/230V) 24K (208/230V) HEAT PUMP Indoor (CFM) Turbo 329 312 329 312 329 High 306 271 324 529 589 Medium 265 229 282 412 483 Low 200 165 212 353 353 AIR THROW DATA HIGH WALL UNIT CAPACITY M
PAGE 14
: MOISTURE REMOVAL COOLING ONLY SIZE 12K 9K 12K 18K 24K Voltage, Phase, Cycle V/Ph/Hz 115-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 Dehumidifying volume L/h 1.50 0.98 1.46 2.18 3.02 Dehumidifying volume PINT/h 3.17 2.07 3.09 4.61 6.38 12K 9K 12K 18K 24K HEAT PUMP Size Voltage, Phase, Cycle V/Ph/Hz 115-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 Dehumidifying volume L/h 1.65 0.97 1.60 2.19 2.71 Dehumidifying volume PINT/h 3.49 2.
PAGE 15
: FAN AND MOTOR SPECIFICATIONS Cooling Only 12K (115V) 9K (208/230V) GL-94*605-N GL-94*520-I Material High Wall Fan GL-94*605-N GL-98*758-I GL-108*818 4.25(108) In. (mm) 3.7(94) 3.7(94) 3.7(94) 3.86(98) Height In. (mm) 23.8(605) 20.5(520) 23.8(605) 29.8(758) 32.2(818) RPG15A/YKFG -15-4-28-1 RPG20B/YKFG -20-4-10L RPG20B/YKFG -20-4-10L YKFG-28-4- 6-5 RPG45B/YKFG -45-4-13 115 220 220 220 220 Phase 1 1 1 1 1 FLA 0.43 0.235 0.235 0.4 0.
PAGE 16
: CN13 P_1 CN12 5 CN19 OPTIONAL M 5(10) SWING MOTOR1 CN27 M CN22 OPTIONAL CN26 L-OUT L-IN CN29 N_IN CN32 CN18 2 4 MULTI-FUNCTION CONTROL BOARD CN43 CN41 CN42 CN44 HA HB X Y E 12V/5V CN45 CN40 CN46 3 Wire Controller OPTIONAL To CCM Comm. To Randomly To Remote To Remote Connected Bus or 485 Alarm Switch Wire-controller Wire-controller ROOM TEMPERATURE SENSOR ABCDE 79 ABCDE ON 12 8 0~F 32~47 F01 23456 F01 23456 23456 FOR SETTING NETADDRESS (CCM Comm.
PAGE 17
: CN13 P_1 CN12 5 CN19 OPTIONAL M 5(10) SWING MOTOR1 CN27 M CN22 OPTIONAL CN26 L-OUT L-IN CN29 N_IN CN32 CN18 2 4 MULTI-FUNCTION CONTROL BOARD CN43 CN41 CN42 CN44 HA HB X Y E 12V/5V CN45 CN40 CN46 3 Wire Controller OPTIONAL To CCM Comm. To Randomly To Remote To Remote Connected Bus or 485 Alarm Switch Wire-controller Wire-controller ROOM TEMPERATURE SENSOR ABCDE 79 ABCDE ON 12 8 0~F 32~47 F01 23456 F01 23456 23456 FOR SETTING NETADDRESS (CCM Comm.
PAGE 18
: GUIDE SPECIFICATIONS INDOOR AIR HANDLER DUCTLESS SYSTEMS Size Range: 3/4 to 2 Ton Nominal Cooling and Heating Capacity Model Number: 40MHH Part 1 - GENERAL 1.01 System Description The unit has the following functions (at a minimum): Indoor, wall-mounted, direct-expansion fan coils are matched with the cooling only or the heat pump outdoor unit. 1.02 Agency Listings Unit is rated per AHRI Standards 210/240 and listed in the AHRI directory as a matched system. 1.