Specifications

128
APPENDIX B — CCN TABLES (cont)
SERVICE-CONFIG TABLES (cont)
TABLE NAME RANGE UNITS POINT NAME DEFAULT
TRIM
Air Temp Lvg SF Trim –10 - 10 ^FSAT_TRIM 0
RAT Trim –10 - 10 ^FRAT_TRIM 0
OAT Trim –10 - 10 ^FOAT_TRIM 0
SPT Trim –10 - 10 ^FSPT_TRIM 0
Cir A Sat.Cond.Temp Trim –30 - 30 ^F SCTATRIM 0
Cir B Sat.Cond.Temp Trim –30 - 30 ^F SCTBTRIM 0
Suct.Press.Circ.A Trim –50 - 50 PSI SPA_TRIM 0
Suct.Press.Circ.B Trim –50 - 50 PSI SPB_TRIM 0
Dis.Press.Circ.A Trim –50 - 50 PSI DPA_TRIM 0
Dis.Press.Circ.B Trim –50 - 50 PSI DPB_TRIM 0
Static Press. Trim (ma) –2 - 2 SPMATRIM 0
Bldg. Pressure Trim (ma) –2 - 2 BPMATRIM 0
SWLG
Filter Status Inpt-Clean Open/Close FLTSLOGC Open
IGC Feedback - Off Open/Close GASFANLG Open
RemSw Off-Unoc-Strt-NoOv Open/Close RMTINLOG Open
Economizer Switch - No Open/Close ECOSWLOG Open
Fan Status Sw. - Off Open/Close SFSLOGIC Open
Dmd.Lmt.Sw.1 - Off Open/Close DMD_SW1L Open
Dmd.Lmt.Sw.2 - Off Open/Close DMD_SW2L Open
IAQ Disc.Input - Low Open/Close IAQINLOG Open
Fire Shutdown - Off Open/Close FSDLOGIC Open
Press. Switch - Off Open/Close PRESLOGC Open
Evacuation Sw. - Off Open/Close EVACLOGC Open
Smoke Purge Sw. - Off Open/Close PURGLOGC Open
UNIT
Machine Control Type 1-6 CTRLTYPE 4
Fan Mode (0=auto, 1=cont) 0-1 FAN_MODE 1
Remote Switch Config 0 -3 RMTINCFG 0
CEM Module installed Yes/No CEM_BRD No
Temp.Cmp.Strt.Cool Factr 0-60 min TCSTCOOL 0
Temp.Cmp.Strt.Heat Factr 0-60 min TCSTHEAT 0
Fan fail shuts down unit Yes/No SFS_SHUT No
Fan Stat Monitoring Type 0-2 SFS_MON 0
VAV Unocc.Fan Retry time 0-720 min SAMPMINS 50
Unit Size (20-60) 20-60 TONS UNITSIZE20
20,25,27,30,35,40,50,60
Disch. Press. Transducer Yes/No DP_TRANS No
MAT Calc Config Yes/No MAT_SEL Yes
Reset MAT Table Entries? Yes/No MATRESET No
Altitude……..in feet: 0-60000 ALTITUDE 0
Space Temp Sensor Enable/Disable SPTSENS Disable
Space Temp Offset Sensor Enable/Disable SPTOSENS Disable
Space Temp Offset Range 1 - 10 ^F SPTO_RNG 5
Return Air RH Sensor Enable/Disable RARHSENS Disable
Filter Stat.Sw.Enabled ? Enable/Disable FLTS_ENA Disable
Stat. Pres. Reset Sensor Enable/Disable SPRSTSEN Disable
generics
POINT_01 Definition 8 CHAR ASCII POINT_01
POINT_02 Definition 8 CHAR ASCII POINT_02
POINT_03 Definition 8 CHAR ASCII POINT_03
POINT_04 Definition 8 CHAR ASCII POINT_04
POINT_05 Definition 8 CHAR ASCII POINT_05
POINT_06 Definition 8 CHAR ASCII POINT_06
POINT_07 Definition 8 CHAR ASCII POINT_07
POINT_08 Definition 8 CHAR ASCII POINT_08
POINT_09 Definition 8 CHAR ASCII POINT_09
POINT_10 Definition 8 CHAR ASCII POINT_10
POINT_11 Definition 8 CHAR ASCII POINT_11
POINT_12 Definition 8 CHAR ASCII POINT_12
POINT_13 Definition 8 CHAR ASCII POINT_13
POINT_14 Definition 8 CHAR ASCII POINT_14
POINT_15 Definition 8 CHAR ASCII POINT_15
POINT_16 Definition 8 CHAR ASCII POINT_16
POINT_17 Definition 8 CHAR ASCII POINT_17
POINT_18 Definition 8 CHAR ASCII POINT_18
POINT_19 Definition 8 CHAR ASCII POINT_19
POINT_20 Definition 8 CHAR ASCII POINT_20