Specifications

( 6 )

5. CONSIDERATIONS FOR REMOTE CONTROL

5-1 HOW TO INSERT BATTERIES :

(a) Remove the cover of battery

compartment at the back of the

remote control by pressing the

tab toward outside, in the direction

of the arrow.

control) with an object not sharp to operate

the remote control.

(b) Mount two batteries size AAA 1.5 Volt supplied

with the remote control. Then close the cover

of the battery component.

Note:

During mounting of batteries

check battery symbols (+, -)

indicated in batteries

compartment.

NOTES

1. The remote control uses two alkaline batteries (1.5 Volts) .

2. Do not use old batteries or batteries of different types, as this may cause the remote control to malfunction.

3. If you do not use the remote control for more than a few weeks, please remove the batteries.

Other wise battery leakage may damage the remote control.

4. The average battery life during normal use is approximately half a year.

5. Replace the batteries when there is no receiving beep coming from the indoor unit or transmission

indicator on the remote control fails to light.

6. Batteries should only be replaced after turning OFF the air conditioner.

5-2 INSTRUCTIONS OF USING WIRELESS REMOTE CONTROL

1- The remote control must be directed toward the receiver of indoor unit when pressing the buttons

of the desired functions. An acoustical acknowledgement sound (beep) will indicate that signal has

been received.

2- Avoid direct sunlight on the receiver of indoor unit, which may interfere with good signal reception

and the air conditioner may not work properly. Draw the curtains to avoid direct sunlight.

3- Avoid obstacles obstructions such as curtains, doors or other materials between the remote control

and the receiver of indoor unit to avoid blocking the signals from the remote control to the indoor unit.

4- The maximum operating distance for the remote control is approximately 8 meters.

5- Keep the remote control away from water. Do not let the remote control fall down.

6- Never use objects with sharp point to press the button on the remote control.

7- Prevent any liquid from falling into the remote control.

8- If other electric applications react to the remote control, move these applications.

5m maximum