BRUKERVEILEDNING - INSTRUCTION BOOK FRYSEBOKS FOR KOMMERSIELL BRUK COMMERCIAL FREEZER CB 225 GL CB 280 GL CB 425 GL NO GB
CONTENTS SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 page Warnings and Guidelines INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11 page Position Electrical connections Switching On Fitting wheels HOW TO USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY INSTRUCTIONS WARNINGS AND GUIDELINES These warnings are provided to improve safety, and should be read carefully before installing or using your freezer. IMPORTANT It is vital that these instructions are kept with the freezer for future use. If the freezer is sold or given to another user, or if you move and leave the freezer behind, you must ensure that the instructions accompany the freezer to enable the next user to use the freezer correctly and read the relevant warnings.
INSTALLATION POSITION Place the freezer horizontally on a firm surface, resting on all four wheels. The room should be dry and adequately ventilated. If the room temperature exceeds 25°C, falls below 10°C or the relative humidity exceeds 60%, the appliance will not function as it should. Do not place the freezer close to sources of heat, radiators, chimneys, etc., and do not place the freezer in direct sunlight.
INSTALLATION FITTING WHEELS The wheels are fitted as shown in the drawing, using the enclosed fitting key. If the freezer is equipped with wheels with brake, you can brake the freezer by pushing the brake down and you can loosen it by pushing it up as shown in the figure. To ensure the stabilization of the freezer you have to brake two wheels at the same time.
HOW TO USE PACKAGING AND POSITIONING Food must be frozen before placing into the freezer. Food must be packed in airtight and moisture-proof packaging to pevent it from drying out. Never fill the freezer above the „load line" mark (see on the figure) which can be found on the innerside of the appliance. TEMPERATURE CONTROL The thermostat ensures that the required temperature is maintained in the freezer. Adjust the temperature by turning the button with a coin that fits the groove.
MAINTENANCE DEFROSTING The formation of frost on the inside of freezers cannot be avoided. Frost is formed when moisture contained in the air comes into contact with the cold surfaces of the freezer. Consequently, the lid should only be opened when necessary, and it should never be left open. A thin layer of ice or frost does not affect the function of the freezer adversely, and can be removed carefully using the scraper provided. IMPORTANT Never use a knife or any other sharp implement to remove frost.
14
15
820 418 454 - 00 - 20072006
