User Guide

ManualsBrandsCarrier ManualsOtherL010125H65

L010125H65 - 0602

42N - FAN COIL UNITS

Cabinet installation instructions

on concealead units

42N - VENTILCONVETTORI

Istruzioni di installazione

mobile su unità da incasso

42N - VENTILO-CONVECTEURS

Instructions d’installation

cabinet sur unité à encastrer

42N - VENTILATOR-KONVEKTOREN

Installationsanweisungen für

das Gehäuse auf dem Einbaugerät

42N - UNIDADES FAN COIL

Instrucciones de instalación

kit mueble unidades para empotrar

Ref. Q.ty

Rif. Q.tà

Ref. Q.té

Bez. Anz.

Ref. Can.

a 1 Cabinet

Mobile

Cabinet

Gehäuse

Mueble

b 2

Cabinet fixing

Viti fissaggio

Vis de fixation

Befestigungsschrauben

Tornillos de fijación

screws

mobile

cabinet

für das Gehäuse

del mueble

c 1 Installation instruction

Istruzioni di installazione

Consignes d’installation

Installations-

Instrucciones de

anweisungen

installación

DESCRIPTION

DESCRIZIONE

DESCRIPTION

BESCHREIBUNG

DESCRIPCIÓN

abc

d e

Fig./Abb. 2

Fig./Abb. 3

d Lower metal sheet

e Screws

Lamiera inferiore

Viti

d Tôle inférieure

e Vis

Unteres Blech

Schrauben

d Placa inferior

e Tornillos

Summary of content (2 pages)

PAGE 1
L010125H65 - 0602 Cabinet installation instructions on concealead units 42N - FAN COIL UNITS Istruzioni di installazione mobile su unità da incasso 42N - VENTILCONVETTORI Instructions d’installation cabinet sur unité à encastrer 42N - VENTILO-CONVECTEURS 42N - VENTILATOR-KONVEKTOREN Installationsanweisungen für das Gehäuse auf dem Einbaugerät 42N - UNIDADES FAN COIL Instrucciones de instalación kit mueble unidades para empotrar a Ref. Q.ty Rif. Q.tà Ref. Q.té Bez. Anz.
PAGE 2
b 22 b Fig./Abb. 4 Fig./Abb. 5 Assembly Montaggio Unscrew the 2 screws e (fig. 2) to remove the lower metal sheet d. Position cabinet a on the unit and hook the cabinet holes on the back of the unit (fig. 4). Secure the cabinet by means of the 2 screws b supplied. Furthermore it is possible to lock the control cover. Knock out the prepunched part of the cover to insert the screw. (fig. 5). Insert the screw and secure the cover (fig. 6). Togliere la lamiera inferiore d svitando le 2 viti e (fig. 2).