Owner`s manual

High Wall Type

Owner’s Manual

–19–

 Preset Operation

Set preferred operation mode for future use.

The setting is memorized by the unit for future

operation (except airflow direction).

Select preferred operation.

1 Press the PRESET button for 3 seconds to

memorize the setting.

The mark is displayed.

When this button is pressed next time, the

memorized operation mode will be enabled.

 Comfort sleep operation

COMFORT SLEEP mode is a OFF timer operation

with automatic temperature and fan speed

adjustment.

1 Press the COMFORT SLEEP button.

Select 1, 3, 5 or 9 hours for the OFF timer operation.

CAUTION

The COMFORT SLEEP mode is not enabled in

the DRY or FAN ONLY operation.

NOTE

• For the cooling operation, the set temperature

will automatically increase 1 degree/hour for

2 hours (maximum 2 degrees increase).

For the heating operation, the set temperature

will decrease.

• During group control operation, the set

temperature and the fan speed are not

automatically adjusted. Only off timer function is

activated.

 Sleep timer operation

To start the sleep timer (OFF timer) operation

1 Press the SLEEP button.

Select 1, 3, 5 or 9 hours for the OFF timer operation.

TEMP

CLR

SLEEP

SET

TEMP

19-EN

+001111053801_00Ta.book Page 19 Friday, January 21, 2011 3:52 PM