Owner`s manual

High Wall Type

Owner’s Manual

–26–

2. Wipe the grill with a soft, dry cloth.

If necessary, a mild liquid detergent can be applied

and wiped off with a dry cloth.

3. Fit the left and right arms of the air inlet grille to the

shafts on the two sides of the air conditioner and push

in completely, and then push in the centre arm.

4. Check that the centre arm has been completely

inserted and close the air inlet grille.

• Push the arrow locations (four) at the bottom of the

air inlet grille to check whether the grille is

completely closed.

Preparing for long Shut Down Period

1. Clean the filters and reposition them in unit.

2. Operate the unit in fan mode for 3 or 4 hours to dry all

internal parts.

3. Turn the unit off and disconnect the main power

supply.

4. Before unit is turned on again, turn the circuit breaker

for at least 12 hours.

26-EN

+001111053801_00Ta.book Page 26 Friday, January 21, 2011 3:52 PM