Automobile Parts User Manual

2-- 2
62--11362
2.2 DISASSEMBLE AND REASSEMBLY
2.2.1 Draining Coolant And Engine Oil
CAUTION
Never removethe radiatorcap until coolant
temperature is below its boiling point.
Loosen the cap slightly to the first stop to
relieve any excess pressure before remov-
ing the cap completely.
1. Open the coolant drain cock or remove the coolant
drain plug and drain the coolant into a proper recep-
tacle/bucket.
2. Removetheoildrainpluganddrainthe engineoilinto
a proper receptacle/bucket.
2.2.2 External Components
Air Cleaner, Muffler and Others
1. Remove the air cleaner and muffler.
2. Remove the fan, fan belt, alternator and starter.
When Reassembling
NOTE
Check to see that there are no cracks on the belt
surface.
After reinstaling the fan belt, be sure to adjust
the fan belt tension.
When reinstalling the fan, make sure that it is
put on correctly.